For easier Heating Repair in Long Island, why not opt for a Smart Heating System in your Home?
Heating & air conditioning systems have been around in one form or another since the early 1900s. However, true changes in HVAC (Heating Ventilation Air Conditioning) units started to be starting the 1980s. The microchip brought on more controls which meant HVAC units could do more.
HVAC service Long Island professionals (www.longislandhvacrepair.com) say that today’s heating are so smart that they can heat specific rooms at specific times. These systems can be programmed with varying options that could only be dreamt about 10-15 years ago.
Smart heating systems are more capable of wider functionality without human control. These systems can:
- Learn how much heat or air is needed in what areas at what times of the day and start regulating the temperature according to what they learn.
- Monitor external data and compare with interior needs for increased efficiency. This is possible with the use of multiple sensors.
Switching to a smart system comes with a variety of benefits.
- More flexible zoning
A smart system is not restricted by the standard 1 or 1 zoning. More zones are possible as the thermostats can self-regulate on a wider range, and each zone can be regulated with its controls.
- Less manual control
Smart systems learn from the manual input and gradually take over. This means if a room is usually heated to 21 degrees every day around 8 p.m. the smart system will start regulating the temperature around 21 degrees at that hour. The system could also be programmed and learn when the room is occupied.
- Higher efficiency
A smart system cuts down on unnecessary heating by leaving out areas that do not need heating and delivering more heat in larger unoccupied areas. This can cut down on energy bills significantly.
- More comfort
With more flexible control options a smart system ensures the whole house is always heated according to the set needs without manual input. This gives more comfort than the old systems that needed manual input with every change in temperature.
Switching to smart heating
It is very possible to switch from a traditional heating system to a smart system. Long Island HVAC repair service professionals advise following some steps when installing a smart heating system
- Equipment assessment
This is to identify outdated equipment. This can be done by listing down all parts of the present system, and comparing them with parts of the newest system available. This can give an idea on what will match the most efficient system and what has to be replaced.
- Energy audit
An energy audit can help identify a high need and low need areas. You will also identify where there are heat loss and ways of fixing it. This will help in designing of the new system.
- Assessing building design
The new system will have to adapt to the existing building structures. This means that a review of the building design must be done so as to match the smart system to the building sections.
Compressor and air handler
The compressor has the electric pump with the refrigerant. The air handler blows the air over the coils which heat or cool it.
Ventilation and air supply
An air duct cleaning long island professional says that this is the system that distributes the heated or cooled air in the building.
This is the sensing unit which reads temperature, humidity and other data for processing so as to make the necessary changes.