Mold Testing Necessary to Detect Basement mold in NYC

Having Problems with Basement Mold?

Mold in the basement is a headache for many house owners. The damp and dark conditions in the basement are ideal for mold growth. Basements are at risk of flooding as water drains if not properly drained. Mold is an organism that grows and multiplies if the conditions remain right. Mold testing New York City experts say that the most common cases of mold problems in households start in the basement. Getting rid of basement mold and preventing further growth can be done by simple means that cost little.


What causes basement mold?

Mold grows on surfaces with excess moisture. Basements usually have little light and are poorly ventilated. This causes build-up of humidity. This excess moisture attracts mold spores which multiply with time.

Mold spores in large numbers form clusters that are visible as a dark green or black substance covering the surface. This is the visible mold. There is invisible mold which floats in the air. A dank odor is the tell-tale sign of mold in the air. This is dangerous mold as it can be breathed in, causing damage to human health.

Some of the common causes of excess moisture in a basement are:

  • Flooding

Heavy rains are the cause of flooding in many houses near water ways. The water comes into the basement along with huge amounts of soil and other debris.

  • Leaks in basement piping

Pipes in the basement can get leaky from years of corroding and wear away. Repairs in the basement can also break pipes and go unnoticed if the basement is poorly lit.

  • Damage water heater

Most homes have their water heater in the basement. If it gets leaky the standing water makes it ideal for mold growth.

  • Sump pump failure

A sump pump collects excess water a house’s foundation and sends it to the main drains. Failure of this pump causes accumulation of water which percolates into the basement.

  • Poor ventilation

Humidity builds up in a poorly ventilated basement as humid air has no escape and condenses on the basement floor.

Getting rid of basement mold

Mold removal New York City experts say that getting rid of excess moisture is the best strategy in stopping a mold growth problem.

  • Fogging

Killing off the existing mold is the first step in eliminating a mold problem. Fogging is the application of chemical fungicides to kill mold spores. This is done with a fogging machine and commercial fungicides.

  • Fixing leaks

Leakages must be identified and fixed as fast as possible. A thorough going over of the plumbing lines should be done. The water heater and sump pump should be regularly checked for damage and leaks.

  • Dehumidifier

Installing a dehumidifier can help get rid of excess moisture in the basement.  The good thing is that the dehumidifier can be configured to automatically adjust humidity levels and work around the clock.

  • Sealers

Waterproofing the basement prevents groundwater passing through the walls and accumulating on the basement walls and floor. Applying a sealer is a fast method of fixing a leaking wall and floor.

Killing mold better

Using fungicides can replace one problem with another. Commercial fungicides are strong poisons which can let off toxic fumes.  Mold remediation experts say killing mold can be done naturally with simple products that are easy to find.


A bottle of vinegar is to be found in almost all homes. To kill mold, pour vinegar on it and let it sit for about 5 minutes then wipe the mold off with a cloth.

Hydrogen peroxide

This is also commonly found. It can be mixed with water and poured on the mold to kill it.


Mix 1 cup of borax with 1 gallon of water then pour it onto the mold